User guide

VoIP Indication — if enabled, the IP call information is displayed on the screen. If the option
is disabled, the VoIP operation is not indicated.
Buzzer — if enabled, the STB provides buzzer together with the telephone set.
Figure 102. Interface Settings Menu
2.7.9.9 Reset All Settings
The Reset All Settings command allows you to reset all parameters to the default values
(factory settings). To confirm the reset, press the F2 (green) button. The F1 (red) button
abandons it.
Figure 103. Parameter Reset Confirmation
iTelec STB 82x 80 User Guide