User guide

To read the received message, open the Messages menu and activate the required message.
If all of the received messages are read, the unread message icon disappears.
Figure 91. Message Reading
2.7.9.4 Time and Date
The Time and Date menu allows you to set the time values that are necessary for correct work
of some features (EPG, and so on):
To set the current time, select the Set Time command and specify the time value using the
remote control numeric buttons. The F2 (green) button confirms the typed data, and the F1 (red)
button abandons it.
To set the time zone, select the Set Time Zone command, choose the required time zone using
the navigation (Up, Down, Right, and Left) buttons, and press the OK button.
To set the current date, select the Set Date command and specify the date value using the
remote control numeric buttons. The F2 (green) button confirms the typed data, and the F1 (red)
button abandons it.
The NTP Server menu item allows you to specify the name or IP-address of the time
synchronization server.
2.7.9.5 Video and Audio
The Video and Audio menu allows you to set the common (for all sources) parameters that
determine the media data playback.
iTelec STB 82x 71 User Guide