User guide

Figure 33. Record Task Editing
The appeared menu allows editing of the record task parameters. In this mode the cursor shape
is changed and the cursor points to the currently edited position. The record time and date are
specified in HH:MM and DD.MM.YYYY formats respectively. The records longer than 24
hours are not supported. To exit the editing mode, press the F1 (red) button. The cursor shape is
restored. The selected menu item is highlighted. To continue the task editing, select the required
parameter (menu item) and press the OK button. To confirm the parameter changes, press the
OK or the F2 (green) button. The F1 (red) button rejects the changes.
To edit the record task parameters, select the task in the list and press OK or F3 (yellow) button.
The edited values must be saved using the Save menu command. To exit from the editing mode
without saving, return to the previous menu using the PAGE BACK or the button.
Press of the F1 (red) button deletes the selected record task. To clear the record task list entirely,
click the Clear List menu command.
2.7.3 Internet Broadcasting
2.7.3.1 Internet Broadcasting Using Announcements
To view TV programs delivered via IP network, you need connection to the global
telecommunication network (Internet). When the Internet connection is established, the IP
address is assigned to the STB automatically. Manual assignment of a static address is available
too.
To view IPTV broadcasting, select the IP Channels item from the main menu. The available
announced channel list (or message about any broadcasting absence) is displayed after few
seconds search. The list is refreshed every 2-3 seconds, therefore repetition of the channel
search is not needed. Select the required channel from the list and press the OK button. During
the playback the STOP and START functions are available. The Selected Channel menu
command provides quick access to the last selected channel.
iTelec STB 82x 36 User Guide