User guide

Figure 11. Initial Configuration of DVB-T Broadcasting
Start the channel configuration using the F2 (green) button. The F1 (red) button is used to
abandon scanning.
During the scanning process the number of detected channels and the progress indicator are
displayed.
Figure 12. Automatic Channel Scanning
If number of the broadcast channels varies, the channel scanning must be repeated. Invoke the
Settings menu using the SERVICES button on the remote control and select the DVB
command. To scan the whole frequency range, use the Scan for Channels command. To scan
only one TV channel bandwidth (8 MHz), use the Scan Custom Frequency command. In the
iTelec STB 82x 22 User Guide