User guide

The yellow (F3) button in the alphabetical input mode turns on the virtual-keypad. In the
virtual-keypad mode the USB keyboard alphabetical input is disabled, but the Cyrillic input is
available (depending on the selected interface language).
Figure 8. Virtual-keypad
If the virtual-keypad is used, the selected key is highlighted with the blue frame. The key
selection is performed with the arrow keys on the remote control, USB keyboard, or STB front
panel. To activate the selected virtual key, press the OK button (the keyboard ENTER key). To
choose the input language, use the Lang virtual key or the remote control Page Refresh button.
To change the typed text case, use the Shift virtual key or the remote control red (F1) button. To
select the text cursor position, use the virtual arrow (< and >) keys or the remote control green
(F2) and yellow (F3) buttons. To delete character before the text cursor, use the Bksp virtual
key, the remote control blue (F4) or Page Back buttons. To turn off the virtual-keypad mode,
press the virtual or remote control Exit key (the keyboard ESC key).
2.7 The STB Main Functionality
2.7.1 Operation Start
When the STB is switched on, the system integrity check and the STB software update search
are performed. If the tests are completed successfully, the STB is loaded in normal mode.
iTelec STB 82x 19 User Guide