User guide

2.6 Basic STB Operations
2.6.1 Operation Modes
The STB operates in the following modes:
• Standby — This state provides minimal power consumption. The STB in the
Standby mode may not be used for a long period of time (up to a few days). The
mode is set with long pressing of the Power button on the remote control. Pressing
of the Power button or any front panel button activates the STB Loading mode.
• Loading — In this mode the system integrity check and the STB software update
search are performed. If the tests are completed successfully, the STB is loaded in
normal mode. The loading process duration depends on the software version and
averages 20-30 seconds.
• Work — This mode provides access to all of the STB features – preview of DVB-T
on-air broadcasting and Internet broadcasting (multicast and Video on Demand),
playback of files from external USB storage, web navigation, system adjustment and
so on.
• Sleep — In this mode the STB processor works on low frequency (sleeps), energy
consumption is low, memory content is not lost. The mode is set with short pressing
of the Power button on the remote control when the STB operates in the Work
mode. It stops execution of all tasks. And the device only keeps track of the internal
clock information and waits the awakening command from the remote control (short
pressing of the Power button). After return to Work mode, the interrupted task is
continued (if possible).
2.6.2 Controlling the STB
2.6.2.1 Front Panel Buttons
The STB control is possible using the navigation buttons on the front panel (Up , Down
, Left , Right , OK ).
The button functionality depends on the screen content displayed at the moment (menu – Menu,
playback control panel – Panel, navigation slider – Slider, confirmation window –
Confirmation). The functionality is described in the following table.
iTelec STB 82x 15 User Guide