User's Manual

8
4 环境要求 Environmental requirement
使用环境温度 Operating temperature：45℃；
5. WARNING
WARNING - Risk of fire or electric shock. LED Retrofit Kit installation
requires knowledge of luminaires electrical systems. If not qualified, do
not attempt installation. Contact a qualified electrician.
WARNING - Risk of fire or electric shock. Install this kit only in luminaires
that have the construction features and dimensions shown in the photographs
and/or drawings and where the input rating of the retrofit kit does not exceed
the input rating of the luminaire.
Do not make or alter any open holes in an enclosure of wiring or electrical
components during kit installation.
WARNING - To prevent wiring damage or abrasion, do not expose wiring to edges
of sheet metal or other sharp objects.
Installers should not disconnect existing wires from lampholder terminals
to make new connections at lampholder terminals. Instead installers should
cut existing lampholder leads away from the lampholder and make new electrical
connections to lampholder lead wires by employing applicable connectors.
This product must be installed in accordance with the applicable installation
code by a person familiar with the construction and operation of the product
and the hazards involved
THIS RETROFIT KIT IS ACCEPTED AS A COMPONENT OF A LUMINAIRE WHERE THE
SUITABILITY OF THE COMBINATION SHALL BE DETERMINED BY AUTHORITIES HAVING
JURISDICTION.