User's Manual

3 使用方法 Method of application
3.1 安装扭簧支架示意图
A 切断电源，检查安装筒尺寸。
A:Turn off the power supply. Check the dimension of recessed can and the lamp holder type to see whether the retrofit
kit can fit the luminaire.
B: 将 E26 灯头旋进并旋紧
B: Screw clockwise the E26 adaptor into the lamp holder. Tighten.
C:连接好连接器。
C: Connect the male to the female connector.
E:将筒灯对准安装筒，向上方向推进安装筒并卡紧。
D: slide the luminaire up into the can firmly.