Specifications

SIM900 AT Command Manual
SIM900_AT Command Manual_V1.03 110 12/24/2010
the TE using unsolicited result code: +CMT:
[<alpha>],<length><CR><LF><pdu> (PDU mode
enabled) or +CMT: <oa>, [<alpha>],<scts>
[,<tooa>,<fo>,<pid>,<dcs>,<sca>,<tosca>,<length
>]<CR><LF><data> (text mode enabled; about
parameters in italics, refer Command Show Text Mode
Parameters +CSDH). Class 2 messages result in
indication as defined in <mt>=1.
3 Class 3 SMS-DELIVERs are routed directly to TE
using unsolicited result codes defined in <mt>=2.
Messages of other classes result in indication as
defined in <mt>=1.
<bm> (the rules for storing received CBMs depend on its data
coding scheme (refer GSM 03.38 [2]), the setting of
Select CBM Types (+CSCB) and this value):
0 No CBM indications are routed to the TE.
2 New CBMs are routed directly to the TE using
unsolicited result code: +CBM:
<length><CR><LF><pdu> (PDU mode enabled) or
+CBM:
<sn>,<mid>,<dcs>,<page>,<pages><CR><LF><data>
(text mode enabled).
<ds> 0 No SMS-STATUS-REPORTs are routed to the TE.
1 SMS-STATUS-REPORTs are routed to the TE using
unsolicited result code: +CDS:
<length><CR><LF><pdu> (PDU mode enabled) or
+CDS: <fo>,<mr>,[<ra>],[<tora>],<scts>,<dt>,<st>
(text mode enabled)
<bfr> 0 TA buffer of unsolicited result codes defined within
this Command is flushed to the TE when <mode> 1...3
is entered (OK response shall be given before flushing
the codes).
1 TA buffer of unsolicited result codes defined within
this command is cleared when <mode> 1…3 is entered
Unsolicited result code
1.Indication that new message has been received
+CMTI: <mem>,<index>
2.Short message is output directly
+CMT: [<alpha>],<length><CR><LF><pdu>
3.Cell broadcast message is output directly
+CBM: <length><CR><LF><pdu>
Reference
GSM 07.05
Note