User manual

USER MANUAL ELDES ESIM251 V1.0 21
FOR ADVANCED USERS
All these features can be congured using program “ELDES Conguration Tool“
As per factory default settings SMS message sending feature in the case of alarm is enabled for all users until the rst successful
delivery of the SMS message and calling in the case of alarm is enabled for all users until the rst answered call, calling feature in the
case of alarm must be disabled for users NO1 and NO2. Mandatory SMS delivery to all users must also be enabled.
a)FirstofallaoodsensorisconnectedtoESIM251inputZ1.
b) ThefollowingcongurationSMSmessagesmustbesenttoESIM251system:
where SMSALL enables mandatory SMS message delivery feature for all users.
where CC12 means that alarm call feature is disabled for users NO1, NO2 after Z1 zone activation.
We make an assumption that users NO3-NO5 were not entered to the system at all.
Task No2:
 Conguringthesystemsothatusers(NO1)and(NO2)receiveSMSmessageaboutaburstwaterpipe(ood)athome.SMSmes-
sages must be delivered to both users.
ESIM151
Alarm
SMS
Alarm
SMS
User
NO1
User
NO2
Flood detector
Heating
Controller
XXXX_SMSALL:ON
XXXX_SMSEXTRA:Z1:CC12