User manual

USER MANUAL ELDES ESIM251 V1.0 19
As per factory default settings C1 output control via calls is disabled for all users, it is necessary to enable this feature and to set the
users who will be able to control the output. Besides, it is also necessary to set relay status for every user when he/she calls the sys-
tem. In this case the relay must be activated and the activation duration must be 1 second; after this the relay returns to the previous
status. Conrmation call feature must be enabled for user NO5 and it is necessary to choose the length parameters for that call. Also,
conrmation SMS messages have to be enabled for user NO3.
a)FirstofallESIM251systemrelayoutputhastobeconnectedtotheconnectorsofgatecontrolunit.
b)The following conguration SMS message must be sent to ESIM251 system:
where CE1345 means that C1 relay control via call is enabled for users NO1, NO3-NO5.
CS5 means that conrmation call feature is enabled for user NO5 after C1 relay status changes.
CT513 means that user NO5 will receive a conrmation call when the relay gets activated and call duration is 3 seconds.
SS3 means that user NO3 will be informed about C1 relay status change by SMS message.
MS10 means that the relay is activated when user NO1 calls the system.
MS30 means that the relay is activated when user NO3 calls the system.
MS40 means that the relay is activated when user NO4 calls the system.
MS50 means that the relay is activated when user NO5 calls the system.
MS1T0.0.1 means that relay status is changed for 1 second when user NO1 calls the system.
MS3T0.0.1 means that relay status is changed for 1 second when user NO3 calls the system.
MS4T0.0.1 means that relay status is changed for 1 second when user NO4 calls the system.
MS5T0.0.1 means that relay status is changed for 1 second when user NO5 calls the system.
Task NO2:
Conguringthesystemsothathousegatescouldbeopenedviafreecallsbythehousekeeper(NO1)andhisfamilymembers
(NO3),(NO4)and(NO5).AftereverysuccessfulgateopeningtheuserNO5wantstoreceiveaconrmationcall(CALLBACK)the
duration of which is 3 seconds, and the user NO3 wants to receive a conrmation SMS message.
XXXX_SMSEXTRA:COC:CE1345,CS5,CT513,SS3,MS10,MS30,MS40,MS50,MS1T0.0.1,MS3T0.0.1,MS4T0.0.1,MS5T0.0.1
Housekeeper
NO1
Gate controller
ESIM151
Family member
NO3
Family member
NO4
Family member
NO5
Conrmation
SMS
Control
Call
Conrmation
Call
GATES
3 sek.
FOR ADVANCED USERS
All these features can be congured using program “ELDES Conguration Tool“