Operating instructions

BIG 10 Bridge
Version: 2013/04/15
39
4 Technical data
WAN interface (SHDSL)
Norm ITU-T G.991.2 G.SHDSL.bis
SHDSL 1/2/4 line pairs
Bandwidth high symmetrical bandwidth (22 Mbps) thanks to eSHDSL- and
EFM-Bonding support (IEEE 802.3ah) and ATM-Bonding
(support of M-pair mode)
Connector 1 × RJ45
LAN interface (Ethernet)
Norm standard Ethernet protocol IEEE 802.3, IEEE 802.1q, 802.1d,
native Multicast
Ethernet features 10/100 Base-T, MDI/MDIX-Autosensing, TCP/IP
Bridge functions transparent layer 2 bridging
max. frame size 1536 bytes
Connector 1 × RJ45
Management and configuration
Configuration local via LCT / Web-GUI
Security password for configuration
Connector 1 × RJ45
Power supply of plug-in power supply module (Euro plug)
Operating voltage range 100 V … 240 V 
Frequency range 50 Hz … 60 Hz
Current consumption ≤ 0.5 A
Power supply of BIG 10 Bridge
Nominal voltage 12 V 
Current consumption < 1.2 A
Connector Hollow plug 2.1 mm
Casing
Design version Plastic casing with integrated display elements and physical
interfaces
Display elements 5 LEDs for status information
Dimensions 240.4 mm  160.4 mm  48.2 mm (W  D  H)
Colour signal white (RAL 9003), jet black (RAL 9005)
Weight 0.6 kg
Environmental conditions (according to ETS 300 019)
Storage and transport Temperature: -40°C ... +70°C
Humidity: 0% ... 85% (not condensing)
Operation Temperature: 0°C ... +45°C
Humidity: 10% ... 85% (not condensing)
Standards, Certificates
EMC ETSI EN 300 386, EN 55022 Class B, ETSI ES 201 468,
ITU-T K.21
Safety EN 60950-1