Operating instructions

BIG 10 Bridge
Version: 2013/04/15
36
3.4 SHDSL
The following pages show the SHDSL configuration and states of the BIG 10.
3.4.1 Config
On this page specific SHDSL parameter can be configured.
Figure 12: SHDSL Config
Operating Mode
The operating mode offers multiple setting options and can be configured in RT (“remote
terminal” or CPE) or COT (“central office terminal”) mode.
EFM G.hs Mode / TC Layer
“EFM”: ITU G.hs according to ITU-T G.994.1 and IEEE802.3ah
“ATM”: The ethernet frames are encapsulated into ATM cells.M
EFM-PAF / ATM-MPair Mode
ATM MPair mode allows to bond several SHDSL links to one logical ethernet link with hig-
her bandwidth. In m-pair mode a single link failure causes a failure of the complete connec-
tion.
ATM VPI Value
VPI: Virtual Path Identifier (default: 0)
Identifier for used virtual path within the ATM network (0 ... 4095)