Operating instructions

BIG 10 Bridge
Version: 2013/04/15
29
4. Acknowledge the change and restart your PC, if necessary.
Your data transfer link is now ready for work. Further questions about configuration of your
PC should be addressed to your Service Provider.
2.7 Restart and Factory Reset
In case you find the BIG 10 in an undefined operating state (e.g. when no data transfer is pos-
sible), press the Reset button on the right side of the casing with a pointed tool (i.e. pen or
paper clip) for a short moment. The device will then perform a restart and the data connection
will be established anew. Contact in any case your service provider before. Pressing the reset
button for more than 5 s will cause a factory reset of the device, whereby all performed set-
tings will be lost. A reset to the default configuration should only be realized by experienced
users. A Factory Reset may result in complete non-functionality of the BIG 10! Therefore,
contact in any case your service provider before!
2.8 Maintenance
Your BIG 10 is maintenance-free. For cleaning please use a dry cloth. Never use aggressive
or caustic detergents.
Before cleaning, remove the power supply unit out of the socket, or put the device
out of operation.
2.9 Uninstallation of the BIG 10
To uninstall the BIG 10, first disconnect all cables, starting with the power supply unit. After
all cables are removed, the device can be taken from the wall.