User Guide

en
www.elcometer.com
en-6
R
5 SPARES & ACCESSORIES (continued)
5.4 ELCOMETER 2410 VISCOSITY CUP STANDARD
CALIBRATION OILS
Specific calibration oils can only be used with specific flow cups - refer
to the table below to determine which calibration oil is required for
each cup.
Supplied in ½ litre (1 pint) bottles complete with
calibration certificate, standard oils have a
specific drain time, dependent upon the
viscosity cup type (Ford, DIN, ISO etc.) and the
orifice size or cup number used.
In order to check the viscosity cup’s calibration
or to certify it for ISO purposes, it is imperative
that viscosity cup standard calibration oils are
used.
Viscosity Oil
Part Number
Flow Cup Type / Number
Kinematic
Viscosity at
e
25°C (77°F)
DIN
ASTM / FORD
ISO
K0002410M021
-
2
3
34cSt
K0002410M022
4
3
4
120cSt
K0002410M023
4
4
6
230cSt
K0002410M024
4
-
6
460cSt
e
Nominal values.
Elcometer Viscosity Flow Cups are supplied with a one year warranty
against manufacturing defects, excluding contamination and wear.
6 WARRANTY STATEMENT
7 TECHNICAL SPECIFICATION
Body Material
Anodised Aluminium
Orifice Material
Stainless Steel
Accuracy
Elcometer 2350:
3%
Elcometer 2351:
10%
Elcometer 2353:
3%
Elcometer 2354:
2.5%
Material Safety Data Sheets for the Elcometer 2410 Viscosity Cup Standard Calibration Oils
can be downloaded via our website:
http://www.elcometer.com/images/stories/MSDS/elcometer_2410m022_m023.pdf
http://www.elcometer.com/images/stories/MSDS/elcometer_2410m021.pdf
http://www.elcometer.com/images/stories/MSDS/elcometer_2410m024_m025_m026.pdf