Installation & Assembly

Page 3 Elcoma Metal Folding Shower Seats
Step 3:
Remove the seat. In each marked location, use a ” drill
bit to make clearance holes through the tile only. Then drill
” pilot holes through the header board and attach the seat
using ” X 3” stainless steel screws. Use a generous amount
of silicone caulk to prevent water from seeping into the
mounting holes.
Step 4:
Make sure that the seat raises and lowers smoothly. If correctly installed, the seat will remain in
the upward, closed position on its own and it will require little effort to be lowered into the seating
position.
 521 Lawrence Rd. NE, Canton, OH 44704 |  [e-mail] |  1.800.352.6625 |  1.800.625.5560USA
 878 William Street, Midland, Ontario L4R 4P4 |  [e-mail] |  705.526.9363 | 705.526.7555CANADA