Operating Instructions and Installation Instructions

ULTRAMAX PB 65 - 120
36 L290 ©MHS Boilers 13/12/2010
11.0 Parameterisation for End User
11.1 Adjustment for individual End User Requirements
If no buttons are pushed during an approximate 8-minute time period, the system automatically reverts back
to the standard display. No changes are saved.
Button
Description
1
Push one of the two line selector buttons. They take you directly to
the “End User” level
2
Use one of the line selector buttons to advance to the respective
line. It is shown in display (1) As “Pxxx”
3
Set the desired values by using the plus or minus button.
The setting is saved as soon as you exit the programming level or
switch into another line. The following parameter list displays all
possible settings.
4
Push either one of these buttons to exit the “End User”
programming level
5
Push the information button to exit the programming level. Any
changed values are being saved.