Specification Sheet

2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2018. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
Project name:
Fixture type:
Date:
4" Remodel Housing with
Adjustable Lampholder
Features
4" Remodel Housing.
●
Integral thermal protector guards against improper
●
lamping.
Four remodel clips secure housing and accommodate
●
various ceiling thickness.
Adjustable socket bracket allows for different lamp
●
types/sizes and proper and consistent lamp positioning.
Pre-wired junction box provided with 1/2" and 3/4"
●
knockouts and with removable access plates.
Trims sold separately.
●
Lamp: 50W MAX.
●
Can be retrofitted to use 120V MR16 lamps with PSA28
●
adapter.
UL Listed for damp location and for feed through.
●
Specifications
Wattage 50W
Voltage 120V
Lamp Type Medium Base (E26)
Damp LocationListed
Technical Details
Construction: 󰾬󰾬
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Aluminum housing for greater heat dissipation.
Installation: Designed for ceiling plenums where 2x6 joists or taller are used. Maximum hole cutout is 4
1/4". See installation sheet for detailed information.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 4" Line Voltage PAR trims.
Lamp: Designed for use with Medium Base (E26) PAR lamps up to 50W.
Listings:
• UL Listed for Damp Location.
• UL Listed for Feed Through.
• Airtight per ASTM E-283.
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a
period of 3 years.
Dimensions
Product Numbers
Item Description Lamp type Watts Voltage
EL99RA Non-Airtight Medium Base (E26) 50W 120V