Specification Sheet

2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2018. All rights reserved • Rev. 28 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
Project name:
Fixture type:
Date:
8" Incandescent IC Square
Housing
Features
Square housing, Type IC, Airtight (with lensed trims).
●
Single wall aluminum construction.
●
Integral thermal protector.
●
Supplied with captive bar hangers for 24" max joist
●
spacing.
Lamp: 120V 75W MAX A19.
●
UL listed for Damp Location and for Feed Through.
●
Specifications
Wattage 75W
Voltage 120V
Lamp Type Medium Base (E26)
Damp LocationListed
Technical Details
Construction: 󰾬󰾬
• IC rated for direct contact with insulation, for use in IC or non-IC conditions.
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with lensed trims to restrict airflow in accordance with ASTM E-283 air-tight
requirements.
• Aluminum housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x8 joists or taller are used. High strength hanger bars can
easily be nailed to joists. Maximum hole cutout is 8 1/2". Suitable for T-grid and drop ceiling applications. See
installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size pryout conduit
knockouts, 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-grids. Spans up to 24"
and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange
allows for single-person installation while aligning the housing with the joists.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with EL10W, EL11W, EL15W, EL88130W.
Lamp: Designed for use with Medium Base (E26) PAR lamps up to 75W.
Listings:
• UL Listed for Damp Location.
• UL Listed for Feed Through.
• UL Listed for Direct Contact with Insulation and Combustible Material.
• Airtight per ASTM E-283.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a
period of 3 years.
Dimensions
Product Numbers
Item Lamp type Watts Voltage
EL8SQ Medium Base (E26) 75W 120V