Specifications Sheet

2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 2
2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 2
Project name:
Fixture type:
Date:
6" Low Voltage Airtight IC
Housing
Features
Double wall IC construction, for use in insulated
ceilings.
Trims sold separately.
Lamp: 50W MAX, 12V, MR16 GU/GX5.3 bi-pin
LED/Halogen (not included).
Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
Note: Use only dimmers specifically designed for use
with magnetic transformers. Low voltage luminaires
may produce audible sound when used with dimmers.
Specifications
Wattage 50W
Voltage 12V
Lamp Type GU5.3 BiPin
Damp LocationListed
Technical Details
Construction: 󰾬󰾬
• Double wall IC rated for direct contact with insulation, for use in IC or non-IC conditions.
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x8 joists or taller joists are used. High strength hanger bars
can easilty be nailed to joists. Maximum hole cutout is 6 1/2". Suitable for T-grid and drop ceiling applications.
See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four
3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24"
and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange
allows for single-person installation while aligning the housings with the joists.
Electrical:
• Input Voltage: 120V AC.
• Output Voltage: 12V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 6" MR16 trims.
Dimmability:
• See dimming compatibility list for a full list of compatible dimmers.
• Note: Lamp used may affect dimmabilty.
Lamp: Designed for use with GU5.3 MR16 LED lamps.
Listings: UL Listed for Damp Location. UL Listed for Wet Location with select trims. UL Listed for Feed
Through. UL Listed for Direct Contact with Insulation and Combustible Material. Airtight per ASTM E-283. Install
a JA8-2016-E lamp/luminaire for Title 24 Compliance.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a
Dimensions
Product Numbers
Item Lamp type Watts Voltage
EL7LVICA GU5.3 BiPin 50W 12V