Specification Sheet

2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2018. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
Project name:
Fixture type:
Date:
3" Remodel Airtight
Miniature Housing
3" airtight miniature housing for remodel applications. For use with 50W GU10 MR16 lamp.
Features
Single wall construction.
●
For use in non-insulated ceilings, where insulation must be
●
kept 3" from all sides of fixture.
Integral thermal protector guards against improper
●
lamping.
Lamp: 50W MAX 120V GU10 MR16.
●
Lamp Holder: Twist-and-lock GU10 MR16 lampholder.
●
Trims sold separately󰾬.
●
Specifications
Wattage 50W
Voltage 120V
Lamp Type GU10
Damp LocationListed
Technical Details
Construction: 󰾬󰾬
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. Maximum hole cutout is 3
5/8". Suitatble for T-grid and drop ceiling applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four
3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 3" MR16 trims.
Lamp: Designed for use with GU10 MR16 LED lamps.
Dimmability:
• Dimmability based on lamp.
Listings:
• UL Listed for Damp Location.
• UL Listed for Wet Location with select trims.
• UL Listed for Feed Through.
• Airtight per ASTM E-283.
Dimensions
Product Numbers
Item Lamp type Watts Voltage
EL39RA GU10 50W 120V