Specifications Sheet
2042 E. Vernon Ave., Vernon, CA 90058 • Tel (323) 231-2600 Fax (323) 231-3200 • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
2042 E. Vernon Ave., Vernon, CA 90058 • Tel (323) 231-2600 Fax (323) 231-3200 • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
Project name:
Fixture type:
Date:
3" New Construction Double
Wall Shallow Housing
3" double wall shallow housing for new construction applications. For use with MR16 lamps with GU10 base.
Features
Double wall aluminum IC construction, for use in
insulated ceilings.
Integral thermal protector guards against improper
lamping.
Lamp: 50W MAX 120V GU10 MR16.
Trims sold separately
Specifications
Wattage 50W
Voltage 120V
Lamp Type GU10
Wet Location Listed with Shower Trims
Damp LocationListed
Technical Details
Construction:
Double wall IC rated for direct contact with insulation. For use in IC and non-IC conditions.
Housing adjusts in frame to accommodate up to 1 1/2" ceiling thickness.
Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
Installation:
Designed for ceiling plenums where 2x8 joists or taller are used.
High strength hanger bars can easily be nailed to joists.
Suitable for T-grid and drop ceiling applications.
See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Two 3/4” knockouts, Seven 1/2” trade size
conduit knockouts, One 3/8" knockout. Four Pry-out knockout slots for easy romex installation.
Hanger Bars: Pre Installed hanger bars with True Nail easy installation in regular lumber, engineered lumber,
and Laminated Beams. Integral T-bar slots for easy installation in T-Bars. Spans up 24" and can be repositioned
90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange allows for single-person
installation while easily aligning the housings with the joists.
Electrical:
Driver is rated for 120V and 277V input (120/277V).
High Efficiency driver with a power factor > 0.9.
Listings: UL Listed for Damp Location and for Wet Location with select trims. UL Listed for Direct Contact with
Insulation and Combustible Material. UL Listed for Feed Through.
Dimensions
Product Numbers
Item Lamp type Watts Voltage
EL39ICA GU10 50W 120V