Specifications Sheet

2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2019. All rights reserved • Rev. 27 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
Project name:
Fixture type:
Date:
3" New Construction Single
Wall Miniature Housing
3" single wall miniature housing for new construction applications. For use with MR16 lamps with GU10 base.
Features
Single wall IC construction, for use in insulated ceilings
Lamp: 50W max 120V GU10 MR16
Lamp Holder: Twist-and-lock GU10 MR16 lamp holder
Trims sold separately󰾬
Specifications
Wattage 50W
Voltage 120V
Lamp Type GU10
Wet Location Listed with Shower Trims
Damp LocationListed
Technical Details
Construction: 󰾬󰾬
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x6 joists or taller joists are used. High strength hanger bars
can easilty be nailed to joists. Maximum hole cutout is 3 5/8". Suitable for T-grid and drop ceiling
applications. See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four
3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24"
and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange
allows for single-person installation while aligning the housings with the joists.
Electrical:
• Input Voltage: 120V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 3" MR16 trims.
Lamp: Designed for use with GU10 MR16 LED lamps.
Dimmability: Dimmability based on lamp.
Listings:
• UL Listed for Damp Location.
• UL Listed for Wet Location with select trims.
• UL Listed for Feed Through.
• Airtight per ASTM E-283.
• Install a JA8-2016-E lamp/luminaire for Title 24 Compliance.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a
period of 3 years.
Dimensions
Product Numbers
Item Lamp type Watts Voltage
EL39A GU10 50W 120V