Specification Sheet

2042 E. Vernon Ave., Vernon, CA 90058 • Tel [phone] Fax [phone] • elcolighting.com
© ELCO Lighting 2018. All rights reserved • Rev. 26 Jun 2018 • ELCO Lighting reserves the right to make specification and design changes without notice.
Page 1 of 1
Project name:
Fixture type:
Date:
4" Low Voltage Airtight
Universal Housing
Features
Single wall airtight construction.
●
Trims sold separately.
●
Lamp: 75W MAX 12V MR16 GU/GX5.3 bi-pin Halogen (not
●
included).
Lamp Holder: MR16 GU/GX5.3 bi-pin socket.
●
Note: Use only dimmers specifically designed for use with
●
magnetic low voltage transformer.
Specifications
Wattage 75W
Voltage 120V
Dimmable Magnetic Low Voltage
(MLV)
Lamp Type GU5.3 BiPin
Damp LocationListed
Technical Details
Construction: 󰾬󰾬
• Single wall new construction.
• Housing adjusts in frame to accommodate up to 1 1/4" ceiling thickness.
• Airtight housing with gasket to restrict airflow in accordance with ASTM E-283 air-tight requirements.
• Steel housing for greater heat dissipation. Stamped galvanized steel frame.
Installation: Designed for ceiling plenums where 2x8 joists or taller joists are used. High strength hanger bars
can easilty be nailed to joists. Maximum hole cutout is 4 1/4". Suitable for T-grid and drop ceiling applications.
See installation sheet for detailed information.
Junction Box: Positioned to accommodate straight conduit runs. Seven 1/2" trade size conduit knockouts, four
3/4" knockouts with pry-out knockout slots. 4 Romex pryouts with strain relief.
Hanger Bars: Pre-installed hanger bars with True Nail facilitate easy installation in regular lumber,
engineered lumber, and laminated beams. Integral T-bar slots for easy installation in T-bars. Spans up to 24"
and can be repositioned 90°. Score lines allow for tool-free hanger bar size reduction. Integral leveling flange
allows for single-person installation while aligning the housings with the joists.
Electrical:
• Input Voltage: 120V AC.
• Output Voltage: 12V AC.
• Thermally protected against improper lamping.
Trims: Compatible with ELCO 4" MR16 trims.
Dimmability:
• Magnetic transformer dims with MLV type dimmers.
• See dimming compatibility list for a full list of compatible dimmers.
• Note: Lamp used may affect dimmabilty.
Lamp: Designed for use with GU5.3 MR16 Halogen lamps.
Listings: UL Listed for Damp Location. UL Listed for Wet Location with select trims. UL Listed for Feed
Through. UL Listed for Direct Contact with Insulation and Combustible Material. Airtight per ASTM E-283.
Warranty: ELCO Lighting warrants products will be free from defects in materials and workmanship for a
period of 3 years.
Dimensions
Product Numbers
Item Lamp type Watts Voltage Dimming
EL1499-75A GU5.3 BiPin 75W 120V
Magnetic Low
Voltage (MLV)