Specifications

PROJECT INFORMATION:
DIMENSIONS
Project Name:
Fixture Type:
Date:
ELCO Lighting©
ELCO Lighting©
INSTALLATION
PRODUCT SPECIFICATIONS
CATALOG NUMBER
EL490RICA
4” Line Voltage Remodel
Housing for LED Inserts
• Single wall IC construction, for use in insulated
ceilings.
• 5 1/2” height allows for use in 2 x 6 construction.
• Adjustable housing accommodates up to 1 1/4”
ceiling thickness.
• Housing meets restricted air flow requirement
(per ASTM E-283).
Lamp: 14W Max 120V
.Lamp Holder: 2-wire quick connect terminal connector
Labels: U.L. listed for damp locations
U.L. listed for feed through
U.L. listed for direct contact with insulation
• CA Title 24 compliant (as high efficacy luminaire).
• Trims sold separately.
Junction Box: Pre-wired junction box provided with
1/2" and 3/4" knockouts. Maximum (8) No. 12 AWG
branch circuit conductors (4 in, 4 out). Junction box
provided with removable access plates.
Example: EL490RICA
See trims page for variety of trims avaliable
Mounting: (4) remodel clips secure housing and
accommodate various ceiling thicknesses.
Mounting Frame: Stamped galvanized steel
construction for corrosion resistance
EL490RICA
4" Line Voltage Remodel Housing
Type IC, Airtight For LED Inserts
PROJECT INFORMATION:
CATALOG NUMBER
E
x
ampl
e
:
EL490RICA
- ELD4R
T1240 - EL4330W
See t
r
im pa
g
e f
o
r var
ie
ty o
f t
r
i
ms av
a
i
l
a
ble
Project Name:
Fixture Type:
Date:
Housing Features: Use in existing insulated
ceilings. Single wall construction.
EL490RICA housings meets restricted air flow
Requirements (Per ASTM E-283 Standards).
IECC Compliant.
EL490RICA meets California Title 24 requirements
with Elco LED inserts.
Lamp: 120VAC, 14W Max. with quick connect
terminal connector for use with LED inserts.
Trim Ring: Flanged metal trim ring,
designed to conceal ceiling cut-out on trim.
LED inserts and trims sold separately. See below.
2042 East Vernon Avenue, Vernon, CA 90058 • Tel: [phone] Fax: [phone] • www.elcolighting.com
© ELCO LIGHTING 2013 All Rights Reserved. Rev.. July 2013. ELCO Lighting reserves the right to make specification and design changes without notice.
ELCO
LIGHTING
INSTALLATION
Junction Box: Pre-wired junction box provided
with 1/2" and 3/4" knockout. Maximum (8) No. 12
AWG branch circuit conductors (4 in, 4 out).
Junction box provided with removable access plates.
Mounting: (4) remodel clips secure housing and
Listed for feed through.
accomodate various ceiling thickness.
Labels: • U.L. listed for damp locations.
• U.L. listed for feed through.
• U.L. listed for direct contact
with insulation.
ELCO Lighting©
ELCO Lighting©
11"
2 WIRE QUICK CONNECTOR2 WIRE QUICK CONNECTOR
MOUNTING CLIPMOUNTING CLIP
ADJUSTABLE SOCKET PLATEADJUSTABLE SOCKET PLATE
5 1/2"
4 3/4"
4"
JUNCTION BOXJUNCTION BOX
TRIMS / INSERTS
Reflector Trim - O.D.: 5"
EL4330W EL4330B
EL4330BZ EL4330C
EL4330CP
Baffle Trim - O.D.: 5"
EL4331W EL4331B
EL4331BZ EL4331N
EL4331CP
LED Engine
• ELD4RT1240 (10.5W, 650lm, 4000°K,
CRI85) LED Engine
• ELD4RT1227 (10.5W, 430lm, 2700°K,
CRI85) LED Engine
ELCO
LIGHTING
2042 East Vernon Avenue, Vernon, CA 90058 • Tel: [phone] Fax: [phone] • www.elcolighting.com
© ELCO LIGHTING 2015 All Rights Reserved. Rev. April 2016. ELCO Lighting reserves the right to make specification and design changes without notice.
COMPATIBLE INSERT LIST
• Insert specification sheets available on Elcolighting.com
• ELD4RT1227, ELD4RT1230, ELD4RT1240 (Trims for ELD4RT: EL4330, EL4331, EL4351)
• EL49730W, EL41030, EL41040, EL41230, EL41330, EL41430, EL41530, EL44030, EL44130
• EL44230, ELSF1030