Specifications

PROJECT INFORMATION:
DIMENSIONS
Project Name:
Fixture Type:
Date:
ELCO Lighting©
ELCO Lighting©
INSTALLATION
PRODUCT SPECIFICATIONS
CATALOG NUMBER
EL39LDICA
3” Line Voltage New Construction
Housing
• Single wall IC construction, for use in insulated
ceilings.
• 4 7/8” height allows for use in 2 x 6 construction.
• Adjustable housing accommodates up to 1 1/4”
ceiling thickness.
• Housing meets restricted air flow requirement
(per ASTM E-283).
• CA Title 24 compliant (as low effeciency luminaire).
• Trims sold separately.
Lamp: 12W Max, 120V, MR16 GU10 LED/Halogen
(not included, by others)
.Lamp Holder: MR16 GU10 socket
Labels: U.L. listed for damp locations
U.L. listed for feed through
Junction Box: Pre-wired junction box provided with
1/2" and 3/4" knockouts. Maximum (8) No. 12 AWG
branch circuit conductors (4 in, 4 out). Junction box
provided with removable access plates.
Example: EL39LDICA
See trims page for variety of trims avaliable
Mounting: Captive bar hangers span 24” and can be
repositioned 90º. Housing accommodates various ceiling
thickness.
Mounting Frame: Stamped galvanized steel
construction for corrosion resistance
3 5/8”
5 3/8”
10 1/2”
HOUSINGHOUSING
SOCKETSOCKET
JUNCTION BOXJUNCTION BOX
5 1/2"4 7/8"
4"3 5/8"
HANGER BARSHANGER BARS
8 1/2"10 1/2"
5 7/8"5 3/8"
Mounting Frame: Stamped galvanized steel material
for corrosion resistance.
Labels:
• U.L. listed for damp locations.
• U.L. listed for feed through.
Example: EL39A - EL2612W
See trims page for variety of trims available
EL39A
EL39A
DIMENSIONS
PRODUCT SPECIFICATIONS
INSTALLATION
CATALOG NUMBER
Housing Features: Integral thermal protector
guards against improper lamping. 4 7/8” height
allows for installation in a 2 x 6 ceiling construction.
For use in existing insulated ceilings. Single wall
construction.
Trim Ring: Polycarbonate trim ring, metal trim ring,
designed to conceal ceiling cutout.
Lamp: 120V, 50W MR 16
Lamp Holder: MR 16 GU 10 base socket.
3” Line Voltagel, Airtight.
The EL39A housing meets restricted air flow
requirements. (Per ASTM E-283 Standards)
Junction Box: Pre-wired junction box provided
with 1/2" and 3/4" knockout. Maximum (8) No. 12
AWG branch circuit conductors (4 in, 4 out). Junction
box provided with removable access plates. Listed
for feed through.
Mounting: Hanger bars span 24” and can be
repositioned 90˚. Housing accomodates various
ceiling thickness.
© ELCO LIGHTING 2012 All Rights Reserved. Rev. Jul. 2012. ELCO Lighting reserves the right to make specification and design changes without notice.
ELCO
LIGHTING
ELCO Lighting©
ELCO Lighting©
4 7/8”
ELCO
LIGHTING
2042 East Vernon Avenue, Vernon, CA 90058 • Tel: [phone] Fax: [phone] • www.elcolighting.com
© ELCO LIGHTING 2015 All Rights Reserved. Rev. July 2015. ELCO Lighting reserves the right to make specification and design changes without notice.