Owner`s manual

iBurst Terminal Desktop Type(UTD) Manual
(5) Signal Strength
Signal Strength indicates the signal strength of the received signal. Here, two kinds of indicators,
percentage indicator and 5-step indicator, are used to indicate the received signal strength.
The percentage indicator is the RSSI value in percent. On the other hand, the 5-step indicator
shows performance of the received signal in words as follows.
No Signal : RSSI = 0%
Poor : RSSI is in the range of 1～24%
Fair : RSSI is in the range of 25～49%
Good : RSSI is in the range of 50～74%
Excellent : RSSI is in the range of 75～100%
(6) Current Data Rate
Current Data Rate indicates the current transmission throughput and the reception throughput.
(7) Total Byte Received
Total Byte Received indicates the total number of bytes of the data which iBurst Terminal has
received from the access point since the communication link is established.
(8) Total Byte Sent
Total Byte Sent indicates the total number of bytes of the data which iBurst Terminal has
transmitted to the access point since the communication link is established.
- 77 -