User Manual

TESTFIX Plus
10
6. Torch Lamp
Slide the switch on the side of the device upwards. The high-performance LED can provide up to 80 hours of light-
ing. Operational lifetime of the LED: > 100,000 hours.
7. Technical Details:
Continuity test optical: 0 ~ 20 Ohm
acoustical: 0 ~ 250 Ohm
Max. Input voltage: 400 V ~
Power supply: 3 x 1,5 V type AA mignon
Protection class: IP 44
Overvoltage category: CAT III 400V
Safety complying: IEC/EN 61010-1 (DIN VDE 0411)
8. Fields of application
The tool is intended for use in applications as described in the operating instruction only. Any other form of usage is
not permitted and can lead to accidents or destruction of the device. Any misuse will result in the expiry of all guar-
antee and warranty claims on the part of the operator against the manufacturer.
9. Declaration of conformity
This product fulfils the low voltage guidelines 72/23/EWG and EMV-guidelines 89/336/EWG.
10. 12 Month Guarantee
Elbro devices are manufactured under strict quality control. If nevertheless functional faults occur during daily us-
age, they are covered by a guarantee of 12 months (valid only with receipt).
● We will eliminate any manufacturing or material faults without charge providing the unit was not opened or
subjected to external influences and was returned to us.
● Damage resulting from mechanical effects or improper handling are not covered by the guarantee.
Our service department will correct faults occurring after expiry of the guarantee.
Please contact us at:
ELBRO AG • Gewerbestrasse 4 • P. O. Box 11 • CH-8162 Steinmaur • Telefon [phone]
Telefax [phone] • e-mail: [e-mail] • www.elbro.com
These Operating Instructions have been prepared with great care. No liability will be accepted with respect to the
correctness or completeness of the data, illustrations and drawings.
Technical Changes Reserved