Specifications

Installation
11
Oven Assembly
CONVEYOR BELT DIRECTION
Convey or travel is factory set for either left to right or
right to left belt operation as ordered. If the opposi te
directio n is required, the pol ari ty o f the drive moto r
must be reversed as follows and the conveyor belt
must be removed, reversed and reinstall ed or the
belt wil l be damaged. Refer to page 13 for belt in-
stall atio n instructio ns.
To reverse polarity:
1. With the oven cold, DISCONNECT THE
POWER CORD TO THE O VEN. Unscrew the
electrical box access cover.
2. Flip the dipswitch marked DIR1 on SW4 (switch
4) on the interface board. See Figure 6.
NOTE: The interfa c e board is locat e d on the
upper rear surface of the electrical box.
Heat
Relay
Blower 1
Relay
Circulation Blowers’
Pressure Switch
Switch 4
(See View A)
View A
ENB 2
DIR 2
ENB 1
DIR 1
SW4
Blower 2
Relay
Interface Board
Figure 6