User's Manual

6888882V04

Preparations for Installation

Before starting the installation of an RCK1000, review the installation plan and make the

following checks:

1. Check that the rack is securely fastened to the floor.

2. Check the mounting surfaces, and the rack mounting holes. Thoroughly clean the

mounting surface and remove all paint, grease and dirt from the holes to provide a better

grounding connection.

3. Check availability of AC power, and grounding arrangements.

4. Check antenna installation, in accordance with the antenna installation and operation

manual.

5. Check the cable runs between the 1KW amplifier and the prescribed antenna, including

the coaxial protector. Make sure that the cables are securely fastened, and do not show

signs of external damage.

6. Make sure that you have the cable sets needed for the installation, which includes the

amplifier cable set, and cables for connecting to the exciter unit (for example, use the

cables in option G156 for connecting to the RM125/RM125R).