User's Manual

6888882V04
RCK1000 Owners-Guide-v4.doc
21
The following table lists the. PS Front Panel Items
Item
Description
Function
1
ON/OFF switch
Turns the PS on
2
AC ON indicator
Lights when the PS unit is powered
3
OUT 1 OK indicator
Lights when the power supply subsystem 1 operates normally
4
OUT 1 NG indicator
Lights when the output voltage provided by power supply subsystem 1 is
not within 25% of its normal value.
To protect the 1KW amplifier, the output voltage is automatically turned off
in case it exceeds the maximum value. To attempt returning to normal
operation, turn the PS off and then back on: if problem recurs, the PS unit
must be serviced
5
OUT 2 OK indicator
Same as Item 3 for power supply subsystem 2
6
OUT 2 NG indicator
Same as Item 4 for power supply subsystem 2
PS Rear Panel
Figure identifies the items located on the front panel of the PS unit, and the following table
explains their functions.
OUT 1
+V +V
-V -V
45V
45V
OUT 2
GND
AC INPUT
110-230VAC/ 47~63Hz
L
N
G
DC OUTPUT
1 2 3 4
Figure 6. PS Rear Panel