Operation Manual

OM-E 2072-09287-00
4-3
To start radio programming:
1. Press MENU to display the Menu screen.
CHAN
FREQ
ALE
BIT
MENU
I
2. Press MORE to scroll to the second Menu screen.
LOCK
PROG
PSW
DIM
MENU
I
3. Press PROG to enter the Programming mode.
RAD
ALE
PROG
4. Press RAD to enter the Radio Programming mode.
RADIO
PROGRAMMING
CHAN
PRMT
OPTS
WHIP
4-3.1 Programming Channels
The Channel programming menu includes two groups of options:
• GET and STOR are used to copy the channel parameters from one selected channel to another,
and ERAS is used to delete the user-configured parameters of a selected channel.
• The other options are used to configure the operational parameters to be used on the channel
being configured.
To enter the Channel Programming mode:
1. Enter the Radio Programming menu.
RADIO
PROGRAMMING
CHAN
PRMT
OPTS
WHIP
2. Press CHAN.
GET
STOR
ERAS
PWR
CHAN
PARAMETERS
USB
I
The CHAN menu provides the following options (see also Figure 4-1):
Option Description
GET
GET retrieves all the parameters defined for a channel already programmed in Micom
Pathfinder (the default is the current channel, but you can select any other channel). You
can store these parameters in a new channel using the STOR function, and then edit the
parameters as required.
STOR
Store the set of parameters in a selected channel.