Operation Manual

OM-E 2072-09287-00
3-45
4. Press ALL.
SEND
PAGE
GLOB
SEL
CALL
GL ALLCALL
5. Press SEL.
NOTE
If you decide to send a Global AllCall, press GLOB.
?
ALL
EDIT:_
6. Type the desired character (only one character is accepted).
NOTE
You can press ? if you decide to send a global AllCall.
?
CLR
ALL
EDIT:5
7. Confirm your selection by pressing ENTER.
NOTE
If you decide to send a global AllCall, press GLOB.
SEND
PAGE
GLOB
SEL
CALL
SL ALLCALL
8. Press SEND or ENTER to start the call. The radio starts sending the
selective AllCall.
NOTE
While the radio is initializing the link, you can press
STOP or ESC to abort the entire process.
STOP
TO
SL ALLCALL
STOP
CH 2
SL ALLCALL
9. After a delay, you will see LINK, and you can start talking.
PAGE
MON
LINK
SL ALLCALL
I
10. Press PAGE if you want to send a message. See page 3-42 for
details.
11. To end the call, press ESC.
END CALLING
Transmitting Net Calls
Before starting, select the net you want to use as explained on page 3-36. However, when MultiNet is
enabled, you will be prompted for a net number as soon as you start a call.
NOTES
• You can program nets using the front panel, or the MRC.
• The radio must be programmed as a MASTER radio in the net (an
ALE Programming option) in order to be able to transmit net calls.