Operation Manual

OM-E 2072-09287-00

3-22

3-7.3 Storing Frequencies

You can store specific frequencies and frequency parameters in channels which you have

programmed.

To store a frequency in a channel:

1. If you are not in the Frequency mode, press MENU to display the Menu screen.

2. Press FREQ.

The last used frequency blinks, and the frequency type is displayed in the top line.

3. If you wish to use the displayed frequency and frequency type, press ENTER. If the frequency

type is DPLX, press ENTER twice to accept both transmission and reception frequencies.

Change the frequency type and the frequency as required (see para. 3-7.1).

4. If necessary, select the other parameters, using the MORE key and pressing the required

function keys.

5. Press MORE twice, and then press STOR.