Installation Instructions

OM-E 2072-09287-00
3-39
To transmit on a specific channel:
1. Initiate a call as explained above (page 3-36 or 3-38) and select the
desired station.
SEND
PAGE
CHAN
CALL
1009
I
2. Press CHAN to select a specific channel.
The channel with the best LQA score is displayed. The speaker is
unmuted to enable you to check the channel quality by listening to it.
SEND
PAGE
BEST
CALL
CH 3 30%
NOTE
If the name of the called station has been edited and the new station
name is not in the directory, no LQA score is displayed.
3. Press BEST to select the channel with the best LQA score...
NOTE
If the name of the called station has been edited and the new station
name is not in the directory, the channel displayed after pressing
BEST is the first scanned channel of the net.
… or
Press the UP/DOWN keys to scroll to the channel of your choice.
NOTE
You can use this option to transmit a call to a station operating in the
Channel mode. If the other station is in the Channel mode, your radio
switches to the Channel mode for the duration of the call, and then
returns to the ALE mode after the link to that station is disconnected.
4. Press SEND or ENTER to initiate the call.
5. The radio now starts the link set up process. During this process, you will see TO alternating
with the number of the channel on which the set up request is being sent (the channel may
change, if the called station does not answer on the first channel(s)).
NOTE
While the radio is initializing the link, you can press STOP or ESC to
abort the entire process.
6. After the link is established, you will see a LINK message. Now you may press the PTT and
start talking.
7. To disconnect the link, press the ESC key (see page 3-36).