Installation Instructions

OM-E 2072-09287-00
3-19
3-7.2 Selecting the Operating Frequency in the FREQ Mode
To enter the frequency mode:
1. Press MENU to display the Menu screen.
CHAN
FREQ
ALE
BIT
MENU
I
2. Press FREQ (F2). The last used frequency blinks, and the frequency
type is displayed in the top line.
SMPX
DPLX
RXO
TXO
SMPX
F
14,000.00
USB
SQ
The letter preceding the frequency in the second line of the display indicates whether the
frequency is used for Transmission (T), Reception (R) or both transmission and reception (F).
3. To use the displayed frequency and frequency type, press ENTER. If the Frequency type is
DPLX, press ENTER twice to accept both transmission and reception frequencies.
or
Change the frequency type and the frequency as explained below.
To change the current frequency/frequencies:
1. If you are not in Frequency mode, press MENU to access the Menu
screen, and press FREQ (F2).
CHAN
FREQ
ALE
BIT
MENU
I
The last used frequency blinks, and the frequency type is displayed
in the top line.
SMPX
DPLX
RXO
TXO
SMPX
F
14,000.00
USB
SQ
or
If you are already in the Frequency mode, press MORE until the
T/R function appears next to the F1 function key, and then press
T/R (F1).
T/R
BAND
SQ
DSP
FREQ
F 15,000.00
I
USB
AGC
The current frequency type is displayed in the top line, followed by
the frequencies in use.
SMPX
DPLX
RXO
TXO
DPLX
F
14,000.00
USB
SQ
2. If necessary, change the frequency type by pressing the relevant function key:
SMPX (F1), DPLX (F2), RXO (F3) or TXO (F4).
NOTE
Different frequency types may have default frequency settings, which
will appear automatically when that frequency type is selected.