Installation Instructions

OM-E 2072-09287-00
3-16
To enter the Channel mode:
1. Press MENU to display the Menu screen.
CHAN
FREQ
ALE
BIT
MENU
I
2. Press CHAN.
The last active channel flashes in the display.
CH 1
3. Press ENTER to confirm your choice, or select another channel as
explained in para. 3-6.3.
BAND
SQ
DSP
CH 6
F
16,000.00
USB
I
3-6.3 Choosing a Different Channel
To choose a channel:
1. Press MENU to display the menu screen, and press CHAN.
The last used channel number is displayed, blinking.
CHAN
FREQ
ALE
BIT
MENU
I
NOTE
To access the priority channel, press ESC momentarily.
The priority channel is available only in the Scan mode,
that is, when ALE is disabled, provided it has been
preprogrammed by the MRC.
2. Select a channel by pressing the UP/DOWN keys until you reach
the required channel,
or
Type the desired number in the keypad.
BACK
CLR
CH 1
Example: To choose channel 12:
The channel number blinks, indicating that the selection has not yet
been confirmed.
1
?
@
A
G J
T
D
M
W
P
B
H K
U
E
N
X
Q
C
I L
V
F
O
Y
R
Z
S
/
2
3
4
5
6
7
8
9
0
#
*
ALM
GPS
P.
E
SC
MENU
Type 12
3. When the desired channel is displayed, press ENTER to confirm
your choice.
NOTE
If you enter a channel that is not yet programmed, a NOT
PROG message appears. To program a new channel,
refer to Chapter 4, or use the MRC software.
BAND
SQ
DSP
CH 12
F
15,000.00
USB
I