Installation Instructions

OM-E 2072-09287-00
2-6
Top Restraining Straps
(2 places)
Figure 2-5. Detail of Transceiver in its Carrying Harness
2-3.2.3 Installation of Optional AD-1000P and GPS Antenna AT-1000
1. If the optional GPS receiver will be in use, insert the GPS support strap in the top loop of the
optional AD-1000P, and slide the AD-1000P in place.
2. Insert the other end of the AD-1000P in a suitable slot, as shown in Figure 2-6, and then secure
the AD-1000P by fastening the strap.
GPS Antenna
Support Strap
AT-1000
AD-1000P
CG-5602
Figure 2-6. GPS Antenna Installed on Harness