User guide

19
Changing pre-set options
Wash temperatures
The warm temperature can be adjusted if you think it is too hot or too cold.
Note: on these models the hot temperature will be the same as the hot water supply
temperature.
1
Select the
WASH TEMP you want to adjust.
2
The wash progress lights show the temperature adjustment possible for that temperature.
Pressing the
button will cause the wash progress light that is on to change.
Advancing the
WASH PROGRESS light will increase the wash temperature. If you keep pressing
the
button, the light will scroll back to the coldest setting available for that wash
temperature.
Note: if you still can’t get the temperature you require, advance the progress light (while in the
options adjustment mode) across to spin and manually adjust the flow of the taps.
Fig.21 Adjusting the temperature setting
Rinse options
On the
HEAVY DUTY, REGULAR and WOOL cycles
you can change the pre-set rinse option.
The pre-set rinse option on these cycles is a
spray rinse followed by a deep rinse. The spray
rinse may be replaced with a short spin or a
deep rinse.
If you have a problem with impurities in your
water supply you may get a better wash if you
change the rinse option to 2 deep rinses. If
you want to conserve water change the rinse
option to 1 deep rinse. If you want to conserve
even more water, choose the
ECO option.
Rinse options
MED spin
light on
Deep rinse Deep rinse
SLOW spin
light on
Short spin Deep rinse
HOLD
light on
Spray rinse Deep rinse