User guide

17
Changing pre-set options
Option Adjustment mode
After using your Smart Drive™ you may want to fine tune some of the options to suit your
wash needs.
There are a number of preset options, which can be altered:
the warm wash temperature
the rinse option on
HEAVY DUTY, REGULAR and WOOL cycles
the Out of Balance Recovery routine.
To enter Option Adjustment mode
1
Turn machine on at the wall but do not press
POWER.
Press
START/PAUSE and hold down, then press POWER.
You will hear two quick beeps and the machine will
show an unusual pattern of lights.
In this mode the lights are used to indicate the
different options available.
The diagram on page 18 shows how the lights
relate to the options you can change.
Pages 19 – 20 explain the different options in more
detail.
2
Use the buttons on the panel to make your changes
to the pre-set options.
3
Press
POWER to return to normal mode.
4
Your Smart Drive™ will automatically remember your
changes.
Fig.18 Entering Option Adjustment mode