User guide

8
Lid lock
Your Smart Drive™ has a lid lock, which locks when your machine is
spinning. This ensures the lid cannot be opened during hazardous
parts of the cycle, providing added safety for you and your family.
The
LID LOCK light (above the START/PAUSE button) comes on
when the lid is locked to tell you when you cannot open the lid.
In short it means you can open the lid while your washer is filling,
agitating, and draining, but not while it is spinning.
When the
LID LOCK light is on, the lid is locked.
When the
LID LOCK light is off, the lid is not locked and the lid can be opened.
If the
LID LOCK light is flashing the lid lock is in process of locking or unlocking, (ie while the
machine coasts down or
START/PAUSE has been pressed). During this stage the lid still cannot
be lifted.
Important!
If the lid is left open, the machine will be unable to lock and the cycle will be halted.
The machine will play a tune and the
LID LOCK light will flash until the lid is closed and
START/PAUSE is pressed.
The lid lock remains unlocked for the majority of the cycle allowing you to add clothes,
dissolve detergent or to add fabric softener (if you do not want to use the Automatic Fabric
Softener Dispenser).
The chart below shows the stages when the lid is locked.
Fill Unlocked
Agitate Unlocked
Spray Rinse Locked
Deep Rinse Unlocked
Spin Locked
Keep children away from the machine, especially when you are using hot water, as the
lid can be opened during fill and agitate.
Important!
DO NOT put anything down the slot in the top deck of your machine.
DO NOT try to disable the lid lock.
Fig.8 LID LOCK light
Fig.9 Lid lock catch