Specifications

22
5 - REPLACEMENT OF THE OVEN
BURNER INJECTOR
According to the type of gas, the oven
injectors are to be similarly replaced, as
stated on the table of the paragraph 2,
operating as follows:
– remove the oven bottom
– unscrew the burner fixing screw (Fig.
8.8)
– slip the burner itself from the oven (Fig.
8.9). Be careful not to damage the
probe of the safety valve.
– remove the injector from the connec-
tion and replace it with the proper one
Fig. 8.8
Fig. 8.9
6 - ADJUSTMENT OF THE PRIMARY
AIR OF OVEN BURNER
With a screwdriver untighten the two
screws (fig. 8.10 and move forward or
backward to close or open the air flow,
the air ring according to the Air
Adjustment Table.
Light the burner and check the flames.
Fig. 8.10
Ring opening
(see “Injector Table”