Owner`s manual

3) Cleaning the inlet and exhaust HEPA filter

 After removing the dust tank, remove the sponge and HEPA filter set (to remove the

whole set in a case box).

 Remove the filter frame and pull out the sponge and HEPA filter from the case box.

Cleaning the sponge and HEPA filter by using soft brush and rinse it under the tap

water and dry it completely before using it again.

 This is a washable filter, we recommend to clean the filter to improve the suction

power.

 For exhaust HEPA filter, press the button under the grid.

 Clean the HEPA filter by using a soft brush and rinse it under tap water and dry it

completely before using it again.

 This is a washable filter, we recommend to clean the filter to improve the suction

power for every 2 months to improve the suction power.