Owner`s manual

OPERATION PROCEDURE AND MODULATON

1. ON/OFF key

Press the key to turn ON/OFF the appliance.

2. Swing key

Press this key after turning on the appliance to swing the wind louver

automatically.

3. Speed key

Press the key to select High/Low wind speed.

4. Temperature/ time adjusting (Up/Down) key

Press the key at cooling mode to increase/reduce the setting temperature;

Press it at timing mode to adjust timer;

Press Up and Down keys simultaneously to switch Fahrenheit and Centigrade

deg

ree temperature.

5. Mode key

Press the key to choose cooling, wind, dehumidification and automatic mode.

6. Timer key

Press the key at standby mode to set ON time.

Press this key at ON mode to set OFF time.

7. Temperature / time display window

This window displays the adjusted temperature and time.

8. Remote controller receiver

This window is used to receive signal of the remote controller.

9. ºC/ºF switching key

Press the key to switch ℃ and ℉.

10. Continunous key

Press the key at cooling mode t

o enter cooling mode.

continuous