PORTABLE AIR-CONDITIONER MODEL: EPAC-A4215D(WH) Owner’s Manual Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the set and quote this information to your dealer when you require service.
CONTENT SAFETY PRECAUTIONS..............................................................3 PRODUCT DESCRIPTION…………………………….………..4 INSTALLATION........................................................................ 5-6 OPERATION PROCEDURE AND MODULATON.........................7 OPERATING METHOD.................................................................8 DRAINAGE METHOD………………………….…………….……….9 CLEANING AND MAINTENANCE................................................
REMOVE ALL PACKING MATERIALS FROM THIS PRODUCT BEFORE USING IT. THIS APPLIANCE MUST BE INSTALLED ON A FLAT SURFACE. PLEASE ENSURE THE ELECTRICITY SUPPLY TO THIS APPLIANCE IS DISCONNECTED BEFORE INSTALLING. Please read this instruction carefully. It is advisable to keep this instruction manual in a safe place for future reference. SAFETY PRECAUTIONS 1. Keep this appliance out of reach from children. Do not let them to operate the appliance without supervision. 2.
PRODUCT DESCRIPTION 1. Handle 2. Air inlet (L) 3. Control panel 4. Louver 5. Caster 6. Remote controller 7. Air inlet (R) 8. Air outlet 9. Dehumidification drainage nozzle 10. Air inlet grille 11. Exhaust duct assembly 12.
INSTALLATION • Place it on a flat and even place, and keep it at least 50cm away from its surrounding object. • Fix the exhaust duct assembly in the air outlet behind the panel (anticlockwise). • Insert the exhaust duct assembly into the window sealing plate; adjust opening width of window so that the window can match with the sealing plate properly. The length of the sealing plate is adjustable.
INCORRECT INSTALLATION • It’s important to keep the exhaust duct smooth. Incorrect installation will affect the efficiency of the appliance. • • Prevent the exhaust duct from seriously bending. Ensure air can flow smoothly in the duct. WARNING: The exhaust duct is designed especially for this model. Don’t replace or lengthen it; otherwise, it will result in operating failure. NOTICE: Maximum length of the exhaust duct is 1,500mm.
OPERATION PROCEDURE AND MODULATON 1. ON/OFF key Press the key to turn ON/OFF the appliance. 4 2. Swing key Press this key after turning on the appliance to swing the wind louver automatically. 3. Speed key Press the key to select High/Low wind speed. 4. Temperature/ time adjusting (Up/Down) key Press the key at cooling mode to increase/reduce the setting temperature; Press it at timing mode to adjust timer; Press Up and Down keys simultaneously to switch Fahrenheit and Centigrade degree temperature. 5.
OPERATING METHOD Cooling mode • When the appliance enters cooling mode after power ON, the cooling mode indicator lamp lights up. • Press Up/Down key to adjust setting temperature (17ºC to 30ºC). • Press Speed key to choose High/Low wind speed. Wind mode • When the appliance enters wind mode after selection, the wind mode indicator lamp lights up. • Press Speed key to choose High/Low wind speed. • In this mode the temperature cannot be set.
DRAINAGE METHOD This appliance is equipped with automatic water vaporization system. The condenser is cooled with the circulating of condensing water to improve cooling efficiency and energy saving. If the internal vessel is full of water, the display screen will display “FL”, and the compressor stops operate automatically. After power off, unscrew the water cover, pull out the water wedge to drain off water, and it will become normal after being restarted.
SEASONAL CLEANING If the appliance will not be used for a long time: • • • • • • Pull out the water wedge to drain off the remaining water. Operate the appliance in wind mode for 2 hours until the inside is dry. Turn off the appliance and unplug from electrical mains. Wash the filter screen and reassemble it. Dismantle the exhaust duct and keep it properly. Cover the appliance with a plastic bag and store it at a dry place.
MAIN SPECIFICATION Model No : EPAC-A4215D(WH) Cooling Capacity : 12,000 BTU/h Thermostat Range : 17ºC to 35ºC Max Air Flow : 420m3/h Input Power : 3.5kW Rated Voltage : 220-240V Rated Frequency : 50Hz Power Consumption : 1350W Refrigerant : R410a NOTICE This product must not be disposed together with domestic waste. It has to be disposed at an authorized place for recycling of electrical and electronic appliances.
