Owner`s manual

Page 7 of 8
setting.
After 10 minutes, please check the LCD display
whether it is operating.
When grilling food or keep warm
mode; the temperature cannot be
set.
Check whether the bottom of the pan is
concavo-convex or the bottom center is concave.
Whether the power indictor is switch on.
The induction cooker will stop heating if the following malfunctions occur, and after 3 seconds,
the display will show the malfunction alarm, the malfunction code will show on the center of
display, you can clear the display by pressing the switch button, and the appliance will enter into
standby mode.
DISPLAY DIRECTION
E0 check whether the pan is in place
E1 the circuit is malfunctioned
E2 the temperature sensor is open-circuited or short-circuited
E3 the voltage is higher (260V-275V)
E4 the voltage is lower (145V-165V)
E5 the cooker surface temperature is higher
E6
IGBT temperature is higher than 95 for 3s
E7 the IGBT temperature sensor is open-circuited or short-circuited
ENVIRONMENT FRIENDLY DISPOSAL
You can help to protect the environment!
Please remember to respect the local regulations: hand in the non-working
electrical equipments to an appropriate waste disposal centre.