Specifications

GAS INSTALLATION REQUIREMENTS

Important !

• The walls adjacent to the cooker must be of heat-resistant material.

• Before installation, make sure that the local distribution conditions (gas type

and pressure) and the adjustment of this appliance are compatible. The applian-

ce adjustment conditions are given on the plate or the label.

• This appliance must be installed and serviced only by a suitably qualied, regi-

stered installer. The installer shall refer to the local standards in force.

• Failure to install the appliance correctly could invalidate any manufacturer’s

warranty.

This appliance is supplied for use on Natural gas, LPG or Town Gas (check the gas regu-

lation label attached on the appliance).

• Appliances supplied for use on Natural gas: they are adjusted for this gas only and

cannotbeusedonanyothergas(LPGorTowngas)withoutmodication.

 The appliances are manufactured for conversion to LPG and Town gas.

• Appliances supplied for use on LPG: they are adjusted for this gas only and cannot be

usedonanyothergas(NaturalorTowngas)withoutmodication.

 The appliances are manufactured for conversion to Natural and Town gas.

• Appliances supplied for use on Town gas: they are adjusted for this gas only and can-

notbeusedonanyothergas(NaturalgasorLPG)withoutmodication.

 The appliances are manufactured for conversion to Natural gas and LPG.

If the Natural gas/LPG/Town gas conversion kit is not supplied with the appliance this kit

can be purchased by contacting the After-Sales Service.

GAS SECTION