Technical data

5
Do not scratch the hob with sharp objects. Don’t use the hob as
a work surface.
Before disposing of an unwanted appliance, it is recommended
that it is made inoperative and that all potentially hazardous parts
are made harmless.
Important: This appliance has been designed for domestic use
only. The appliance is NOT suitable for use within a semi-com-
mercial, commercial or communal environment.
If the supply cord (not supplied with the appliance) is dama-
ged, it must be replaced by the manufacturer or its service
agent or a similarly qualied person in order to avoid a ha-
zard.
Do not operate your appliance by means of an external timer or
separate remote-control system.
Do not place or leave empty pans on the glass ceramic hob.
Metallic objects such as knives, forks, spoons and lids should not
be placed on the hob surface since they can get hot.
Do not use metallic kitchen utensils (e.g. ladles). It is preferable
to use plastic or wood kitchen utensils.
Please use pans of recommended size (see minimum pan dia-
meter recommended). It is not advisable to use pans smaller
than the cooking zone. The pans have to be placed in the centre
of the cooking zone.
Do not use defective pans or pans with a curved bottom.
Please use suitable pans marked for induction cooking.
Please keep your distance from the electromagnetic elds by
standing 5-10 cm from the cooking zones.When possible use the
rear cooking zone.
Magnetic objects (e.g. credit cards, oppy disks, memory cards)
and electronic instruments (e.g. computers) should not be pla-
ced near the induction hob.
IMPORTANT WARNING: The induction hob complies with
the applicable Standards for domestic cooking appliances.
Therefore it should not interfere with other electronic units.
Persons with cardiac pacemakers or any other electrical im-
plants must check with their doctor if they can use an induc-
tion cooking system (and check any possible interferences
with the implants).
Attention: Detach the appliance from the mains if the cera-
mic glass is cracked and contact the After-Sales Service.