User manual

www.elationlighting.com!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!"W!!!!!!!!!!!!!!!!!!#!$%&'!(#)!**+!,-./!012314!567
FEED
Use this function to activate the PAN/TILT error correction.
1. Access the main menu.
2. Press UP until “SPEC” is displayed, press ENTER.
3. Press UP until “FEED” is displayed, press ENTER.
4. The display will show “ON/OFF”.
5. Press UP to display “ON” to activate or “OFF” to deactivate this function.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
FANS
This function is used to change the functionality of the internal cooling fans.
1. Access the main menu.
2. Press UP or DOWN until “SPEC” is displayed, press ENTER.
3. Press UP or DOWN until “FANS” is displayed, press ENTER.
4. The display will show “HIGH/AUTO”.
5. Press UP or DOWN to select “HIGH” or “AUTO”.
6. Press ENTER to confirm.
7. Press MODE/ESC to return to the main menu.
Hibernation
When activated, this function will put the fixture in power stand-by mode.
This function will automatically activate after a predefined period of time of no DMX
activity. This prevents the fixture form expending power for extended periods in the event
the fixture has been left on accidently. In stand-by mode the lamp and all motors will
power down if no DMX signal is sent to the fixture for a period of 15 minutes (default, or
can be user defined). The fixture will automatically reset and return to normal operation
once a DMX signal is sensed.
1. Select “HIBE” by pressing UP or DOWN.
2. Press ENTER and press UP or DOWN to adjust the time value from “15M”
(default value) to any value from 1 minute (01M) to 99 minutes (99M), or “OFF”.
3. Press ENTER to confirm the new value MODE/ESC to return to the main menu
without making any changes.