User manual

www.elationlighting.com!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!""!!!!!!!!!!!!!!!!!!#!$%&'!(#)!**+!,-./!012314!567
SCAN
When you activate this reset function, only the PAN and TILT motors are reset.
1. Access the main menu.
2. Press UP until “RESE” is displayed, press ENTER.
3. Press UP until “SCAN” is displayed, then press ENTER to confirm.
4. Press MODE/ESC to return to the main menu.
COLR
When you activate this reset function, only the Color Wheel motor is reset.
1. Access the main menu.
2. Press UP until “RESE” is displayed, press ENTER.
3. Press UP until “COLR” is displayed, then press ENTER to confirm.
4. Press MODE/ESC to return to the main menu.
GOBO
When you activate this reset function, only the Gobo Wheel motor is reset.
1. Access the main menu.
2. Press UP until “RESE” is displayed, press ENTER.
3. Press UP until “GOBO” is displayed, press ENTER to confirm and begin the
reset process.
4. Press MODE/ESC to return to the main menu.
OTHR
When you activate this reset function, only the motors not specified in the other
reset commands previously listed are reset.
1. Access the main menu.
2. Press UP until “RESE” is displayed, press ENTER.
3. Press UP until “OTHR” is displayed, then press ENTER to confirm.
4. Press MODE/ESC to return to the main menu.